
Three back injuries in one department. Repeated cuts from the same machine. Another fall that keeps a worker home for weeks. Viewed separately, each case tells one worker’s story. Viewed together, they often reveal a hazard that needs attention.
Accurate injury and illness records help employers spot these patterns and focus prevention efforts. OSHA’s recordkeeping rule, 29 Code of Federal Regulations 1904, requires certain employers to track qualifying cases. Those records also help employers calculate their DART rate — a measure of how often work-related injuries and illnesses cause Days Away from work, Restricted duties, or job Transfers.
With OSHA's annual recordkeeping deadlines approaching, use the weeks ahead to check your records and prepare. These eight tips explain how to meet recordkeeping requirements and turn the numbers into action.
1 Check whether your company must keep records.
If your company had more than 10 employees at any time during the last calendar year, you generally must keep OSHA injury and illness records. Count employees across the entire company, not at a single location. Some low-hazard industries qualify for a partial exemption. However, even exempt employers must keep records if OSHA or the Bureau of Labor Statistics directs them to do so in writing.
2 Know which cases to record.
Record a work-related injury or illness if it is a new case and results in:
- Days away from work.
- Restricted work or transfer to another job.
- Medical treatment beyond first aid.
- Loss of consciousness.
- A significant injury or illness diagnosed by a licensed health care professional, such as a broken bone or punctured eardrum.
A visit to a doctor alone does not make a case recordable. Check OSHA’s recording criteria, first-aid list, and specific recording rules for certain cases, such as contaminated needlestick injuries and occupational hearing loss.
3 Report severe events fast.
Employers covered by the OSH Act must report the following work-related events, even if they are exempt from keeping injury and illness records:
- A death within eight hours, if it occurs within 30 days of the incident.
- An in-patient hospitalization, amputation, or loss of an eye within 24 hours, if it occurs within 24 hours of the incident.
If you learn about an event later, the reporting clock starts when you find out. An in-patient hospitalization is reportable only if the worker is formally admitted for care or treatment, not for observation or testing alone.
Report through OSHA’s online reporting system, your local OSHA office, or 800-321-6742 (800-321-OSHA).
4 Record each case within seven days.
Enter each recordable case on the OSHA Form 300 Log and Form 301 Incident Report within seven calendar days of learning about it. Use Form 300 to track cases and their outcomes. Use Form 301 to document details about each incident.
5 Certify and post your annual summary.
At year-end, review your 300 Log, total each column, and complete Form 300A. Enter zeros if you had no cases. A company executive must certify the summary. Post it in a visible place where employees can see it from February 1 through April 30.
Some establishments must also submit their data electronically through OSHA’s Injury Tracking Application from January 2 through March 2. Check the size and industry requirements to find out which data your establishment must submit.
6 Keep records for five years.
Save your 300 Logs, 300A summaries, and 301 reports for five years after the end of the year they cover. Update stored 300 Logs when you discover new cases or when a case outcome changes.
7 Calculate your DART rate and track trends.
Use your 300 Log and 300A summary to find your rate:
- Add the number of cases checked in columns H (days away) and I (job restriction or transfer) on your 300 Log, not the number of days.
- Multiply that number by 200,000.
- Divide by the total hours all employees worked, as listed on Form 300A.
The 200,000 figure equals 100 full-time employees working 40 hours a week, 50 weeks a year. The result shows your DART cases per 100 full-time workers. For example, three DART cases and 100,000 hours worked give a DART rate of 6.0.
Because the rate accounts for differences in workforce size, you can:
- Compare your rate to your industry's national average.
- Track your trend from year to year.
- Check whether your DART rate changes after safety improvements.
Find industry averages with Bureau of Labor Statistics data, or calculate your rate with the National Safety Council's benchmarking tool.
8 Look beyond the rate and fix recurring hazards.
Review your records throughout the year. Look for:
- Similar injuries in the same department, work area, shift, or task.
- Cases involving the same tool, machine, vehicle, material, or work practice.
- Repeated restricted-duty cases for the same type of injury.
- Serious cases that follow earlier, uncorrected incidents.
Use the details on each Form 301 to find contributing factors. Correct the hazards, then check whether those changes protect workers.
A low rate alone cannot confirm a safe workplace. Review near misses, worker concerns, and inspection findings, too. Give workers a simple way to report injuries and hazards promptly, and never punish them for reporting. Accurate records help turn injury data into decisions that can protect workers and your bottom line.
For more information, visit OSHA’s recordkeeping resources or contact a DWC safety training specialist at HealthSafety@tdi.texas.gov or 800-252-7031, option 2.
